Service manual

BEST ACCESS SYSTEMS
Indianapolis, Indiana
1
Planning the installation
Contents
These installation instructions describe how to install your
B.A.S.I.S.® G EX Series (EXG) or B.A.S.I.S. V EX Series (EXBV)
Exit Hardware Trim.
†
B.A.S.I.S. EX Series Exit Hardware
Trim is available for use with the following types of exit
devices manufactured by Precision Hardware (1000 Series
and 2000 Series) and Von Duprin® (98/99 Series):
‡
These instructions cover the following topics:
Planning the installation ................................................ 1
Preparing the door .......................................................... 2
Installing the exit hardware and trim ............................ 6
Completing the installation .......................................... 10
Site survey
Use the following survey to record information about the
installation site.
Lock information
Exit hardware type:
❑ Rim
❑ Mortise
❑ Surface vertical rod
❑ Concealed vertical rod
Lock function:
❑ EV–With key override
❑ NV–Without key override
Door information
Door handing and bevel:
❑ Left-hand reverse bevel (LHRB)
❑ Right-hand reverse bevel (RHRB)
Door type:
❑ Wood
❑ Metal
Door thickness:
inches (1 3/4″ to 2 1/4″)
† The Best Access Systems logo and B.A.S.I.S. are
registered trademarks of Best Lock Corporation.
■
rim
■
surface vertical rod
■
mortise
■
concealed vertical rod.
‡ Von Duprin is a registered trademark of
Von Duprin, Inc.
Components checklist
Use the following checklist to make sure that you have the
items necessary to install your B.A.S.I.S. Exit Hardware Trim.
Components provided in the box:
❑ B.A.S.I.S. escutcheon and lever assembly
❑ Battery bracket
❑ Battery cover
❑ Battery pack
❑ Battery screw package
❑ Cylinder assembly and related components (for EV
function only)
❑ Cylinder mounting sleeve (for Von Duprin EV functions
only)
❑ Bar code ID sticker (for your records)
❑ Temporary operator card
❑ Installation template and instructions
Other components (for EV function only):
❑ 7-pin core
❑ Control key
Special tools checklist
Use the following checklist to make sure that you have the
special tools necessary to install your B.A.S.I.S. Exit Hardware
Trim.
❑ T15 TORX® bit driver
††
❑ ED211 cylinder wrench (for EV function only)
†† TORX is a registered trademark of the Camcar
Division of Textron.
Installation Instructions for
B.A.S.I.S. EX Series Exit Hardware Trim