Service manual

Installation Instructions for B.A.S.I.S. Mortise Locks

BEST ACCESS SYSTEMS

Indianapolis, Indiana

Completing the installation

16 Install inside and outside levers

1 Unscrew the inside spindle one full turn to allow the

spindles to turn freely.

2 With the handle pointing toward the door hinges,

insert the outside lever and spindles assembly into the

lock from the outside of the door.

3 Slide the inside lever onto the inside spindle and

secure it with the set screw.

4 Making sure that the core is positioned properly in the

outside escutcheon (EV and FV only) and the

escutcheons are aligned properly on the door, tighten

the escutcheon mounting screws.

Note: If a core is not available, you can use the cylinder

wrench (ED211) to help you align the core opening in the

escutcheon.

5 Turn the levers to check that they operate smoothly.

Figure 16 Installing the levers

Spindles

Location

of set

screw

Outside of door Inside of door

Spindles

Outside of door