Service manual

Troubleshooting
12–4 B.A.S.I.S. V Service Manual
4. Start B.A.S.I.S. Transport:
a. On the PDA, tap Start, then Programs, then BAS, then Transport.
b. From the B.A.S.I.S. Transport Main window on the PDA, tap
View, then Transport.
The Transport window shows the Panel/Reader Tree.
Note: When transferring history records from the door, you do
not need to highlight a reader in the tree.
5. Using B.A.S.I.S. Transport, select the communications activity you
want to perform.
6. When you see the login window, press the password override
button on the electronics board.
7. When you have finished performing communications activities,
disconnect the PDA from the lock. Press the button on the
programming cable connector and unplug the programming cable
from the lock’s communication port.
Figure 12.1 Enabling communications with the password override button
(escutcheon for standard mortise lock shown)
Outside escutcheon
Electronics board
Password override
button