Service manual

Troubleshooting
12–2 B.A.S.I.S. V Service Manual
VISUAL AND AUDIBLE RESPONSE QUICK REFERENCE
The table below summarizes the visual and audible responses for
standard B.A.S.I.S. Locks and for EX Series Exit Hardware Trim. See
page 12–7 for complete troubleshooting details.
Green LED Red LED Sounder Meaning
2 flashes ––– ––– Prompt to enter the new PIN during PIN
programming mode, or prompt to use a second card
and/or PIN during two card and/or PIN control.
3 flashes ––– ––– Access is granted.
3 slow flashes ––– ––– Passage mode is granted.
3 slow flashes ––– 3 long tones Battery is low (warning).
Stays on ––– ––– Door is in communication mode.
––– 3 flashes 3 short tones Access is denied.
––– Stays on ––– PIN programming mode is active, or the lock is busy
after communication mode has ended.
3 flashes 3 flashes 3 short tones Battery is very low (alarm).
4 flashes 4 flashes 4 short tones Lock performed an internal reset.
––– ––– 3 long tones Lock timed out and is waiting for an action.
––– ––– 3 short tones Bad data was presented to the reader.