Service manual

Servicing Exit Hardware Trim Escutcheon Parts
B.A.S.I.S. V Service Manual 10–29
Reinstalling the
shear pin
1. Insert the shear pin into the lever, making sure that the shear pin is
positioned in the lever so that the head faces the opposite direction
of the lever handle. See Figure 10.16.
2. Reinstall the following parts:
■ lever assembly (page 10–27)
■ beam and beam roller (page 10–25)
■ yoke (page 10–23)
■ lever return spring (page 10–8)
■ mounting plate (page 10–7)
■ lift finger (page 10–5)
■ escutcheon gasket (page 10–3)
■ mounting standoffs (page 10–2)
■ escutcheon in the door (page 8–14).