Service manual

Servicing Exit Hardware Trim Escutcheon Parts
10–28 B.A.S.I.S. V Service Manual
SERVICING THE SHEAR PIN
Replacements kits are available for shear pins. See page 4–10.
Each time you service the shear pin you need to replace the following
parts with new parts:
■ escutcheon gasket (C64564)
■ cable tie
■ lift finger screw (page 4–9)
■ mounting plate screws (page 4–9)
■ 4 shoulder screws (page 4–10).
Removing the shear
pin
1. Remove the following parts:
■ escutcheon from the door (page 8–13)
■ mounting standoffs (page 10–2)
■ escutcheon gasket (page 10–3)
■ lift finger (page 10–4)
■ mounting plate (page 10–6)
■ lever return spring (page 10–8)
■ yoke (page 10–22)
■ beam and beam roller (page 10–24)
■ lever assembly (page 10–26).
2. Remove the shear pin from the lever. See page 10–28.
Figure 10.16 Removing and reinstalling the shear pin
Shear pin