Service manual

Servicing Exit Hardware Trim Escutcheon Parts
B.A.S.I.S. V Service Manual 10–23
Reinstalling the
yoke
1. Position the yoke in the escutcheon with the threaded nut down.
2. Apply Lubriplate
®
GR-132 grease or an equivalent quality petroleum
around the slots on the face of the yoke.
3. Tightly secure the yoke to the escutcheon using the 4 new shoulder
screws (20–25 lbs. torque). See Figure 10.12.
4. Reinstall the following parts:
■ lever return springs (page 10–8)
■ mounting plate (page 10–7)
■ lift finger (page 10–5)
■ escutcheon gasket (page 10–3)
■ mounting standoffs (page 10–2)
■ escutcheon on the door (page 8–14).