Service manual

Servicing Exit Hardware Trim Escutcheon Parts
10–22 B.A.S.I.S. V Service Manual
SERVICING THE YOKE
Each time you service the yoke you need to replace the following parts
with new parts:
■ escutcheon gasket (C64564)
■ cable tie
■ lift finger screw (page 4–9)
■ mounting plate screws (page 4–9)
■ 4 shoulder screws (page 4–10).
Removing the yoke 1. Remove the following parts:
■ escutcheon from the door (page 8–13)
■ mounting standoffs (page 10–2)
■ escutcheon gasket (page 10–3)
■ lift finger (page 10–4)
■ mounting plate (page 10–6)
■ lever return springs (page 10–8).
2. Unscrew the 4 shoulder screws and discard. See Figure 10.12.
3. Remove the yoke from the escutcheon.
Figure 10.12 Removing and reinstalling the yoke
Shoulder screws
Shoulder screws
Yoke