Service manual

Servicing Exit Hardware Trim Escutcheon Parts
10–20 B.A.S.I.S. V Service Manual
SERVICING THE LOCKING PLATE
Each time you service the locking plate you need to replace the
following parts with new parts:
■ escutcheon gasket (C64564)
■ cable tie
■ lift finger screw (page 4–9)
■ mounting plate screws (page 4–9).
Removing the
locking plate
1. Remove the following parts:
■ escutcheon from the door (page 8–13)
■ mounting standoffs (page 10–2)
■ escutcheon gasket (page 10–3)
■ lift finger (page 10–4)
■ mounting plate (page 10–6)
■ lever return springs (page 10–8)
■ motor assembly (page 10–16).
2. Slide the locking plate out of the escutcheon. See Figure 10.10.
Figure 10.10 Removing and reinstalling the locking plate
Locking plate
Locking lever