Service manual

Servicing Exit Hardware Trim Escutcheon Parts
10–18 B.A.S.I.S. V Service Manual
.
3. Place the spacer on the socket he4ad screw. Using a 3/32″ hex
driver, reinstall the socket head screw.
4. Route the motor harness into the groove in the escutcheon, as
shown in Figure 10.8.
5. Reinstall the sounder onto the escutcheon. See Figure 10.9.
Figure 10.8 Routing the motor harness
Locking plate
Locking lever
Pivot pin
Socket head screw
Motor harness
Motor assembly