Service manual

Servicing Exit Hardware Trim Escutcheon Parts
10–12 B.A.S.I.S. V Service Manual
Reinstalling the
dual validation
control electronics
board
1. Perform steps 1 through 5 starting on page 9–15.
2. Reinstall the following parts:
■ primary harness (page 10–10)
■ mounting plate (page 10–7)
■ lift finger (page 10–5)
■ escutcheon gasket (page 10–3)
■ mounting standoffs (page 10–2)
■ escutcheon on the door (page 8–14).