Service manual

Servicing Exit Hardware Trim Escutcheon Parts
B.A.S.I.S. V Service Manual 10–5
Reinstalling the lift
finger
1. Position the lift finger on the escutcheon in the orientation noted in
step 2 on page 10–4.
2. Position the washer on the lift finger screw. Tightly secure the lift
finger with the lift finger screw (25–30 lbs. torque). See Figure 10.3.
3. Reinstall the following parts:
■ escutcheon gasket (page 10–3)
■ mounting standoffs (page 10–2)
■ escutcheon on the door (page 8–14).