Service manual

Servicing Exit Hardware Trim Escutcheon Parts
10–4 B.A.S.I.S. V Service Manual
SERVICING THE LIFT FINGER
Each time you service the lift finger you need to replace the following
parts with new parts:
■ escutcheon gasket (C64564)
■ lift finger screw (page 4–9).
Removing the lift
finger
1. Remove the following parts:
■ escutcheon from the door (page 8–13)
■ mounting standoffs (page 10–2)
■ escutcheon gasket (page 10–3).
2. Note the orientation of the lift finger. See Figure 10.3.
3. Remove the lift finger screw and discard.
4. Remove the washer, and lift finger.
Figure 10.3 Removing and reinstalling the lift finger (Precision Hardware rim
configuration shown)
Lift finger
Screw