Service manual

Servicing Exit Hardware Trim Escutcheon Parts
B.A.S.I.S. V Service Manual 10–3
SERVICING THE ESCUTCHEON GASKET
Each time you service the escutcheon gasket you need to replace it
with a new gasket. Use part number C64564 when ordering.
Removing the
escutcheon gasket
1. Remove the followings parts:
■ escutcheon from the door (page 8–13)
■ mounting standoffs (page 10–2).
2. Peel the gasket off the escutcheon and discard. See Figure 10.2.
Note: You may need to scrape remnants of the gasket from the
escutcheon.
Reinstalling the
escutcheon gasket
1. Starting at the bottom of the gasket, peel away the protective
backing a small amount at a time while unrolling the gasket into
position on the escutcheon.
2. Press the gasket into place on the escutcheon. See Figure 10.2.
3. Reinstall the following parts:
■ mounting standoffs (page 10–2)
■ escutcheon on the door (page 8–14).
Figure 10.2 Removing and reinstalling the escutcheon gasket
Escutcheon gasket