Service manual

Servicing Standard Outside Escutcheon Parts
B.A.S.I.S. V Service Manual 9–19
3. Remove the magnetic stripe reader assembly from the outside
escutcheon, sliding the reader harness through the slot in the
escutcheon. See Figure 9.16.
Note: To determine the read head track position for ordering a
magnetic stripe reader replacement kit, look at the back of the
reader for the label that states, “This reader was factory set to read
magstripe track no. 1 2.” The track number is circled. If there is no
label, the track number is 3.
Figure 9.16 Removing the magnetic stripe reader assembly from the outside
escutcheon
Reader harness
Magnetic stripe
reader assembly
Outside escutcheon