Service manual

Servicing Standard Outside Escutcheon Parts
B.A.S.I.S. V Service Manual 9–9
4. Slide the com port into place in the escutcheon and tighten the nut.
See Figure 9.8.
5. Reinstall the following parts:
■ harness clamp (page 9–4)
■ escutcheon gasket (page 9–2)
■ inside and outside escutcheons. For mortise lock instructions, see
page 5–6. For cylindrical lock instructions, see page 7–8.
Figure 9.8 Connecting the sounder and com port to the outside escutcheon
Sounder
Com port
Nut
Spacer
Close-up of the bottom
edge of the escutcheon
showing the com port
in position