Service manual

Servicing Standard Outside Escutcheon Parts
9–8 B.A.S.I.S. V Service Manual
4. Loosen the nut and slide the com port out from the escutcheon.
Reinstalling the
primary harness
1. Connect the primary wire harness to the J3 connector on the
electronics board.
2. Remove the backing from the adhesive tape and apply the tape to
the escutcheon.
3. Press the sounder in place on the tape.
Figure 9.7 Disconnecting the sounder and com port from the outside escutcheon
Sounder
Outside escutcheon
Nut
Com port