Service manual

Figures
B.A.S.I.S. V Service Manual xv
Connecting the sensor harness to the electronics board 11–10
Removing the V Series sensor switch assembly 11–11
B.A.S.I.S. Transport Diagnostics window and Diagnostics Codes window
11–13
Connecting the PDA to a standard lock 11–15
Locating the communication port for exit hardware trim 11–15
Starting B.A.S.I.S. Transport 11–16
Disconnecting the programming cable from the lock 11–17
TROUBLESHOOTING
Enabling communications with the password override button (escutcheon for
standard mortise lock shown) 12–4
Connecting the programming cable to the lock 12–6