Service manual

Servicing Standard Outside Escutcheon Parts
B.A.S.I.S. V Service Manual 9–3
SERVICING THE LENS COVERS
A replacement kit is available for the lens covers. See page 4–6.
Removing the lens
covers
1. Remove the following parts:
■ inside and outside escutcheons. For mortise lock instructions, see
page 5–3. For cylindrical lock instructions, see page 7–5.
■ escutcheon gasket (page 9–2).
2. Pry the lens covers off the top of the outside escutcheon.
Reinstalling the lens
covers
1. Insert the lens covers into the holes in the top of the outside
escutcheon.
2. On the inside of the escutcheon, slide the retaining rings up and
around the ends of the lens covers.
3. Reinstall the following parts:
■ escutcheon gasket
■ inside and outside escutcheons. For mortise lock instructions, see
page 5–6. For cylindrical lock instructions, see page 7–8.
Figure 9.2 Removing and reinstalling the lens covers (smart card reader shown)
Retaining ring
Location of the lens cover Location of the lens cover
Retaining ring