Service manual

Servicing Exit Hardware Trim Parts
8–8 B.A.S.I.S. V Service Manual
SERVICING THE EXIT HARDWARE
Removing the exit
hardware
1. Remove the following parts:
■ battery cover (page 8–2)
■ battery pack (page 8–4)
■ battery bracket (page 8–6).
2. Remove the exit hardware (lock stile case, case cover, touch bar
assembly, and related hardware); follow the instructions provided
by the exit hardware manufacturer.
Note: The B.A.S.I.S. escutcheon is secured on the outside of the door
by the screws used to mount the lock stile case on the inside of the
door.
Reinstalling the exit
hardware
1. Reinstall the exit hardware (lock stile case, case cover, touch bar
assembly, and related hardware); follow the instructions provided
by the exit hardware manufacturer.
Note: Make any adjustments to the exit hardware necessary for
compatibility with lever function outside trim.
Caution
When securing the B.A.S.I.S. escutcheon, make sure that it does not
pinch the wire harness.
2. Reinstall the following parts:
■ battery bracket (page 8–7)
■ battery pack (page 8–5)
■ battery cover (page 8–3).