Service manual

Servicing Exit Hardware Trim Parts

8–6 B.A.S.I.S. V Service Manual

SERVICING THE BATTERY BRACKET

Removing the

battery bracket

1. Remove the following parts:

■ battery cover (page 8–2)

■ battery pack (page 8–4).

2. Remove the two battery bracket mounting screws. See Figure 8.3.

3. Loosen the nut securing the com port to the bracket and slide the

com port out of the bracket. See Figure 8.4.

Figure 8.3 Removing and reinstalling the battery bracket on the door

Figure 8.4 Removing and reinstalling the com port in the battery bracket

Mounting screws

Inside of door

Battery bracket

Com port

Nut