Service manual

Servicing Exit Hardware Trim Parts
8–4 B.A.S.I.S. V Service Manual
SERVICING THE BATTERY PACK
Removing the
battery pack
1. Remove the battery cover. See page 8–2.
2. Remove the battery pack from the holder inside the battery bracket.
Note: You might need to cut a cable tie if one was used to dress the
wire harness inside the battery bracket.
3. Disconnect the battery pack from the battery connector on the wire
harness.
Figure 8.2 Removing and reinstalling the battery pack
Battery pack
Inside of door
Battery holder
(inside bracket)