Service manual

Servicing Cylindrical Parts
7–14 B.A.S.I.S. V Service Manual
7. Reinstall the battery door:
a. Making sure that the battery door does not pinch any wires,
insert the tabs of the battery door into its mating slots and swing
the door closed.
b. Use a T15 TORX bit driver to secure the battery door with the
security screw. Tighten firmly.
8. Reinstall the following parts:
■ levers (page 7–4)
■ core and throw member (page 7–2).
Figure 7.17 Reinstalling the battery door (four-cell door shown)
Tabs
Security screw