Service manual

Servicing Cylindrical Parts
B.A.S.I.S. V Service Manual 7–13
6. Reinstall the battery pack:
a. Connect the battery pack to the battery connector on the wire
harness inside the battery compartment.
Note: The battery connection has 3 wires and 3 pins. The wire
colors are:
■ red with white stripe
■ white
■ black with white stripe.
Caution
When connecting the battery pack, make sure:
■ there are no loose wire connections where the wires are inserted
into the connectors
■ the connectors are firmly mated.
b. Place the battery pack inside the battery compartment.
Note: For the four-cell battery pack, position the battery so that
the foam will face the battery door.
Caution
When routing the battery wires, make sure the wires are not routed
across any sharp edges or over any surface that could damage their
sleeving or wire insulation.
Figure 7.16 Reinstalling the battery pack (four-cell pack shown)
Inside escutcheon
Battery pack
Foam