Service manual

Servicing Cylindrical Parts
B.A.S.I.S. V Service Manual 7–9
2. Install the trim hole inserts, bushings, and hub washers:
a. Insert the two trim hole inserts into the upper trim hole on each
side of the door.
b. For locks with brass escutcheons, insert the two bushings into
the harness hole on each side of the door.
c. For locks with brass escutcheons, on each side of the door, slide
a hub washer over the chassis sleeve so it rests on the hub.
Figure 7.12 Reinstalling the bushings, trim hole inserts, and hub washers
Trim hole inserts
Bushings
Hub washers