Service manual

Servicing Cylindrical Parts
7–6 B.A.S.I.S. V Service Manual
3. Remove the battery pack.
a. Remove the battery pack from the battery compartment.
b. Disconnect the battery pack from the battery connector on the
wire harness.
4. Remove the escutcheons.
a. Remove the combination mounting screw and standard
mounting screw from the inside escutcheon.
Figure 7.7 Removing the battery pack (four-cell pack shown)
Inside escutcheon
Battery pack
Figure 7.8 Removing the escutcheon
Combination mounting screw
Standard escutcheon screw
Inside escutcheon