Service manual

Servicing Cylindrical Parts
B.A.S.I.S. V Service Manual 7–5
SERVICING THE INSIDE AND OUTSIDE ESCUTCHEONS
Removing the inside
and outside
escutcheons
1. Remove the following parts:
■ core and throw member (page 7–2)
■ levers (page 7–3).
2. Remove the battery door.
a. Use a T15 TORX bit driver to remove the security screw from
the battery door.
b. Open the access door and remove it from the escutcheon.
Figure 7.6 Removing the battery door (four-cell door shown)
Tabs
Security screw