Specifications

"6(37-462,6
Function/Application:
Transforms 120 volts AC to 24 volts AC. (To get 24 volts
DC, use with 8WCON, AC to DC converter.) Typ i cal ly
used as a power supply for electrically-op er at ed locks.
Function/Application:
Converts AC (alternating current) to DC (direct current)
for locking circuit applications. (Typ i cal ly used with
8W599 transformer.)
%#
Standard plate
%#
Narrow plate
Function/Application:
Normally open push-button switch provides mo men tary
switch closure when pressed. Typically used to momentarily
en er gize electrified locks or strikes or used as a re quest-to-
exit switch on access control systems.
12
IDH Max
®
& ELECTRO
Features:
• 400 Ampere surge capability
• Electrically isolated base
• UL recognized
• Single-phase, full wave bridge
Specifications:
Average forward current: 25 amps
Case: Plastic case with an electrically isolated aluminum base
Polarity: Terminal designation embossed on case: +DC output,
-DC output, AC not marked
Mounting position: Bolt down. Gain the highest heat transfer
ef fi cien cy through the surface op po site the terminals. Use
silicone heat sink compound on mounting surface for
max i mum heat transfer.
Terminals: Suitable for “fast-on” connections. Readily solderable
and corrosion resistant. Soldering is recommended for
applications greater than15 amperes.
Mounting torque: 20 inch-pounds maximum
Case size: 1.030 x 1.030 inches
Temperature range: -85° to 347°F (-65 ° to + 175°C)
To order specify: 8WCON
Features:
• Offers exceptionally high power for its compact size
• UL listed
• Thermally fused
• Convenient 4 point mounting provision allows rapid installation
in a standard
1
/
2
" knockout
• Foot-mounts for surface installation
• Pre-stripped pigtails provided for quick primary connection
• Secondary connection by screw terminals
• Sturdy nylon bobbin construction
• Cadmium plated finish
Specifications:
Primary voltage: 120 VAC (Wire Leads)
Secondary voltage: 24 VAC (Screw Terminals)
Secondary VA: 40 volts-amperes
Dimensions: 2
1
/
4
" x 2
1
/
8
" x 2
15
/
16
"
To order specify: 8W599
8W599
%
%
" !! !
8WCON
%#%#
8WbU-1-a & N
Features:
• Positive “snap” feedback
• Industrial-grade switch designed for rugged control applications
• Factory assembled with trimplate
• Standard or narrow plate available
• 1
3
/
16
" dia. mushroom head—red in color
Specifications:
Electrical rating: 28VDC or 115 VAC, 10A resistive, 5A in duc tive,
3A lamp load (see ter mi nol o gy on the back cover)
Switch type: SPST-NO-DB, FORM-X contacts, 25,000 cycles at
full load, 50,000 cycles me chan i cal life
Mounting hole:
5
/
8
" (.625) dia.
Switch dim.: 1.187 dia.x 1.528 overall length
Std. wall plate: 2
3
/
4
" x 4
1
/
2
"
Narrow wall plate: 1
1
/
2
" x 4
1
/
2
"
Material/finish: Satin stainless steel
Wire leads: Two 6" long 20 AWG insulated wire leads
To order specify: 8WBU-1-A stan dard plate 8WBU-1-N narrow plate
8443:,68,6
911;(:,)6/+.,6,*8/-/,6