Specifications

Architectural Series Fire Extinguisher Cabinets
Submittal and Detail Sheet
PROJECT:_____________________________
MODEL NUMBER:_______________________
ARCHITECT:___________________________
DATE:_______________________________
LOCATION:___________________________
QUANTITY:___________________________
CONTRACTOR:_________________________
DISTRIBUTOR:_________________________
SPECIFICATIONS:
All recessed and semi-recessed cabinets and surface-mounted steel cabinets have a heavy gauge, white baked enamel box. Surface-mounted
cabinets with aluminum door and trim have a box constructed entirely of clear or color anodized aluminum. Surface-mounted cabinets with
stainless steel door and trim have a box constructed entirely of 304 stainless steel with a #4 finish.
Steel and stainless steel cabinets have a full ½" thick hollow metal heavy gauge door. Trims and doors feature one piece construction with satin
finish pull handle, continuous matching hinge, and self-adjusting roller catch. Baked white enamel finish is standard for steel units. Stainless
steel cabinets have a #4 finish, 304 stainless steel.
Aluminum cabinet doors and trims are extruded or fabricated aluminum with clear satin anodized finish. Aluminum door is ½" thick with satin
finish matching pull handle and hinge. Color anodized finishes are available as options.
STEP 1: Select cabinet model number from the dimensions on page 2 and indicate on the top of this sheet. To specify aluminum trim and door,
use the prefix, "AL" before the model number. To specify stainless steel trim and door, use the prefix, "SS" before the model number. Note:
Rough opening dimensions are larger for fire-rated cabinets. Please refer to separate Fire-Rated Cabinet Submittal and Detail Sheet.
† Trimless cabinets must be installed before the drywall because their plaster stops must be behind the drywall.
Trimless cabinets are not recommended for block wall installation.
* See back of this sheet or attached sheet for Recessed Handle (required only for 4" return trims when ADA wall projection compliance is
necessary)
LARSEN'S MANUFACTURING COMPANY - www.larsensmfg.com
7421 Commerce Lane N.E., Minneapolis, MN 55432 Phone: [phone] FAX: [phone]
FLORIDA DIVISION: 3130 N.W. 17
th
Street, Ft. Lauderdale, FL 33311 Phone: [phone] FAX: [phone]
©2011 Larsen's Mfg. Co.
INOX DESIGN,INC.
01.10.12
2
PHARMACY CARE SYSTEMS
FOY UNION HALL
◆
◆
◆