Specifications

Counter Support Bracket
Information & Installation
……..Continued
Preparation and Application of Drywall
To provide for a fully recessed installation, the drywall must be
installed and patched around the bracket supporting arm. Once
the drywall has been installed, it should be plastered around the
bracket to provide a finished installation. Anodized aluminum
face plates, with adhesive backing, eliminate time consuming
patching and finishing.
Rakks counter brackets can also be used for wall mounted bench
supports. The EH-1416B bench bracket is specially drilled to ac-
cept 5” planks.
Brackets can be ordered with a 5/8” opening grommet to accom-
modate RJ-45 connectors or wire ties.
Rakks counter supports are stocked in unfinished “mill” alumi-
num, off-white powder coated, clear anodized and primed finishes.
Custom powder coat and anodized finishes are available.
Rakks counter supports can be ordered in custom sizes and con-
figurations and are easily cut down in the field.
Face Plate for 2” x 2” T
EHFP-0202
3 7/8”
July 2011
Model #
Counter
Depth Size T-Extrusion
Weight
Capacity
EH-1209 to 13”
12” x 9” 2” x 2” x .25” 650#
EH-1212
to 18” 12” x 12” 2” x 2” x .25” 450#
EH-1818 to 25” 18” x 18” 2” x 2” x .25” 450#
EH-1824 to 30” 18” x 24” 2” x 3” x .188” 450#
EH-1416B
Bench w/
5” planks
14.25” x
15.75”
2” x 3” x .188” 450#
EH-1209-FM to 13” 12” x 11” 2” x 2” x .25” 430#
EH-1212-FM to 18” 12” x 14” 2” x 2” x .25” 430#
EH-1818-FM to 25” 18” x 20” 2” x 2” x .25” 300#
EH-1824-FM to 30” 18” x 26” 2” x 3” x .188” 300#
Weight capacity is based on evenly distributed static loads
Face Plate for 2” x 3” T
EHFP-0203
EH-1416 Bench Bracket
Bracket with 5/8”
grommet option
Custom Bracket Configurations
3 7/8”
Engineered and manufactured in the United States by:
Rangine Corporation, Needham Massachusetts 02494
Tel: [phone] Fax: [phone]
www.rakks.com