Specifications

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/10
LCN 1460 SERIES
72
72FC
72DS1
30
62A
18
18FC
18DS1
18PA
18PADS1
18PAFC
ACCESSORIES
17
COVERS
COVER, 1460-72
Standard, non-handed, slim line plastic cover with feature strip.
FULL COVER, 1460-72FC
Optional, non-handed, plastic cover provides complete enclosure.
DESIGNER SERIES METAL COVER, 1460-72DS1
Optional, non-handed designer series metal full cover provides
complete enclosure with a stylish look. Required for plating and
custom powder coat option.
INSTALLATION ACCESSORIES
PLATE, 1460-18/1460-18DS1/1460-18FC
Required for hinge side mount where top rail is less than
2 1/2” (64 mm).
Required for top jamb mounting where head frame is less than
1 3/4” (44 mm) or flush ceiling condition exists.
Plate requires minimum 1 1/2” (38 mm) minimum top rail or
1 1/4” (32 mm) head frame.
With full cover, use PLATE, 1460-18FC. With Designer Series
metal cover, use PLATE, 1460-18DS1.
PLATE, 1460-18PA/1460-18PADS1/1460-18PAFC
Required for parallel arm mounting where top rail is less than
4 3/8” (111 mm), measured from the stop.
Plate requires 1 3/4” (44 mm) minimum top rail.
With full cover, use PLATE, 1460-18PAFC. With Designer Series
metal cover, use PLATE, 1460-18PADS1.
CUSH SHOE SUPPORT, 1460-30
Provide anchorage for fifth screw used with CUSH arms where
reveal is less than 3 1/16” (78 mm).
BLADE STOP SPACER, 1460-61
Lowers parallel arm shoe to clear 1/2” (13 mm) blade stop.
AUXILIARY SHOE, 1460-62A requires a top rail of 7” (178 mm).
Optional shoe replaces -62PA for parallel arm mounting of regular
arm with overhead holder/stop.
Special template required.
PA FLUSH PANEL ADAPTER, 1460-419
Provides horizontal mounting surface for CUSH, PA or EDA shoe
on single rabetted or flush frame.
419
61