Specifications

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/10
LCN 1460 SERIES
MOUNTING DETAILS
TOP JAMB (PUSH SIDE)
MOUNTING
MAXIMUM OPENING
110°
A = 6 3/4” (169 mm)
B = 11 1/4” (286 mm)
180°
A = 3” (76 mm)
B = 7 1/2” (191 mm)
Hold-open points up to maximum
opening with hold-open arm.
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended at hold-open point or where a door
cannot swing 180°.
Reveal of 2 1/2” (64 mm) allows 180° opening with REGULAR HOLD-OPEN
ARM. 3 1/2” (89 mm) allows up to 180° opening with REGULAR ARM or
180° with optional LONG HOLD-OPEN ARM when standard head and tube
is replaced with optional LONG HEAD AND TUBE, 1460-78HL . 4 7/8” (124
mm) allows up to 140° with REGULAR ARM or LONG HOLD-OPEN ARM.
7” (178 mm) allows up to 140° opening with LONG ARM when standard
rod and shoe is replaced with optional LONG ROD AND SHOE, 1460-79LR.
Top Rail requires 1 7/8" (48 mm) minimum.
2 3/4" (70 mm) minimum with closer on PLATE, 1460-18.
Head Frame less than 1 3/4” (44 mm) requires PLATE, 1460-18.
For flush ceiling condition with 2” (51 mm) headframe, use PLATE,
1460-18. With Full cover, use PLATE, 1460-18FC.
Plate requires 1 1/4” (32 mm) minimum. With Designer Series
metal cover, use PLATE, 1460-18DS1.
Delayed Action Add suffix “DEL” to selected cylinder (eg. 1461 DEL).
Delays closing from 110° to 75° or 180° to 95° depending on templating.
Delay time adjustable up to approximately 1 minute
.
Options
Delayed action cylinder.
Long arm, hold-open arm,
long hold-open arm.
Full cover (FC).
Designer Series metal cover (DS1).
Special Templates
Customized installation templates or
products may be available to solve
unusual applications.
Contact LCN for assistance.
13
1460 - 18
Optional, Non-handed
Designer Series
Metal Cover