Specifications

Options
Delayed action cylinder.
Hold-open arm.
Full cover. (FC)
Designer Series metal cover. (DS1)
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
HINGE (PULL) SIDE
MOUNTING
MAXIMUM OPENING
110°
A = 5 7/8” (149 mm)
B = 10 7/8” (276 mm)
or *180°
A = 2 7/8” (73 mm)
B = 7 7/8” (200 mm)
Hold-open points up to maximum
opening with hold-open arm.
*Frame and trim permitting.
LCN 1460 SERIES
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended at hold-open point or where a door
cannot swing 180°.
Reveal should not exceed 3/4” (19 mm) for regular arm or 1/2” (13 mm)
for hold-open arm.
Top Rail less than 2 1/2” (64 mm) requires PLATE, 1460-18.
With Full cover, use PLATE, 1460-18FC. Plate requires 1 1/2” (38 mm)
minimum. With Designer Series metal cover, use PLATE, 1460-18DS1.
Clearance of 2 3/8” (60 mm) behind door required for installation.
Delayed Action Add suffix “DEL” to selected cylinder (eg. 1461 DEL).
Delays closing from 110° to 65° or 160° to 75° depending on
templating.
Delay time adjustable up to approximately 1 minute.
MOUNTING DETAILS
12
Optional, Non-handed
Designer Series
Metal Cover
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/10