Specifications

Catalog Number
Notes Type
2AV 2'x4'
Linear Fluorescent
T8
1, 2 or 3 lamps
FEATURES & SPECIFICATIONS
INTENDED USE — The Avante 2x4 is a general lighting luminaire for large spaces
including open offices, circulation areas, classrooms, libraries, cafeterias, airport
ticketing and wait areas, and numerous other commercial applications. Static or air
functions available. Certain airborne contaminants can diminish integrity of acrylic.
Click here for Acrylic Environmental Compatibility table for suitable uses.
CONSTRUCTION — Housing is gloss white enamel on cold rolled steel. All edges
hemmed or rounded.
All shieldings pivot on light traps and swing down for easy lamp access.
Molded light traps prevent light leaks between shielding and endplates.
All air and screw slot units supplied with screw-on tee bar clips. Ballast access is
from below.
OPTICS — Twin matte white polyester powder paint finished reflectors provide
uniform light distribution. Optional low brightness diffuse aluminum stepped reflec-
tors available.
All diffusers control direct light distribution and glare by shielding lamps from direct
view.
Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075"
diameter holes backed with white acrylic diffuser.
Straight blade louver (SBL) sides of perforated metal with staggered round holes
and solid blade louvered center. Sides and louver backed with white acrylic diffuser.
Metal diffuser aligned mini slots (MDM) 46% open perforated metal backed with
white acrylic diffuser.
Acrylic diffuser prismatic lens (ADP) extruded acrylic lens backed with white acrylic
diffuser.
Metal diffuser with center slots (MDC). 52% open metal, .075" diameter holes with
1" wide solid center. Slotted with 1/2"x2" open slots. Diffuser is backed with white
acrylic overlay.
ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF,
non-PCB, UL Listed, CSA Certified. Ballasts are sound rated A. Standard combina-
tions conform to UL 935.
INSTALLATION — Trims available for standard 1" and 9/16" tee bar or screw slot grids.
Fixtures can be row mounted end-to-end.
Drywall ceiling adapters available.
LISTINGS — UL Listed to US and Canadian safety standards. Chicago Plenum ap-
proved and NYC approved (see Options).
Avante is covered by one or more of the following patents: 5,988,829; 399,586; 411,641;
413,402; 2,212,513; 87,513.
NOTE: Specifications are subject to change without notice.
NOTES:
1 Refer to options and accessories section for more detailed information.
2 MVOLT (120 - 277 volt).
3 Must specify voltage, 120 or 277.
4 SIMPLY5 system includes 13' S5SSC RELOC wiring system. Specify voltage
unless HW (hardwire) or PWS1836 is ordered.
Specifications
Length: 48" (1219)
Width: 24" (602)
Diffuser Width: 8" (203)
Depth: 5-1/2" (140)
Sheet #: 2AV 2X4 T8 ARCH-280
All dimensions are inches (millimeters).
Fluorescent
Lamp type
32 32W T8 (48")
Series
2AV 2' wide
2AV
Trim type
G Grid trim
ST Screw slot
Number of
lamps
1
2
3
Not included.
Diffuser
MDR Metal diffuser, round
holes
SBL Straight blade louver,
round holes
MDM Metal diffuser, mini slots
ADP Acrylic diffuser, linear
prismatic lens
MDC Metal diffuser, round
holes with large center
slots
1
Others available.
Voltage
MVOLT
2
347
Others avail-
able.
Air function
(blank) Static (no air function)
A Air return/supply
Options
GEB10IS Electronic ballast, < 10% THD,
instant start
GEB10RS Electronic ballast, < 10% THD, rapid start
S5100 1.0 ballast factor, SIMPLY5™ system
4
ALG Acrylic litter guard
1
EL14 Emergency battery pack (nominal
1400 lumens, see Life Safety section)
GLR Internal fast-blow fuse
3
HW Hardwire for SIMPLY5™ system; replaces
RELOC® wiring
PWS1836 6' prewire, 3/8" dia., 18-gauge, 3
wires
NY3 New York City approved
CP Chicago Plenum approved
APB Air pattern control blades
1
Reflector option
ASR Aluminum stepped reflector
Accessories
Order as separate catalog number.
DGA24 Drywall ceiling adapter, unit installation. Use G trim plus DGA accessory for
fixture trim flange and fixture support in plaster or plasterboard ceilings.
For shortest lead times, configure product using standard options (shown in bold).
Example: 2AV G 2 32 MDR MVOLT GEB10IS
ORDERING INFORMATION
32