Specifications

FLUORESCENT LB-W
Series Number of lamps Lamp type Voltage Options
LB 4 l
amps, 15-3/8" wide
2LB 2 lamps, 15-3/8" wide
For tandem double-length unit,
add prex T. Example: TLB
2
4
Not included
17 17W T8 (24")
32 32W T8 (48")
14 14W T5 (22.5")
1,4
28 28W T5 (46.5")
1
54 54W T5HO (46.5")
2
120
277
347
MVOLT
Others available
1/4 One, four-lamp ballast
1/3 One, three-lamp ballast
GEB10IS Electronic ballast, <10% THD, instant start
GEB10PS Electronic ballast, <10% THD, programmed start
EL Emergency battery pack (nominal 300 lumens, see Life Safety Section)
GLR Internal fast-blow fuse
3
GMF Internal slow-blow fuse
3
LSC Lens safety clips (2 per xture)
LP_ Lamped; specify lamp type and color
CSA Listed and labeled to comply with Canadian Standards
SSR Specular silver interior nish (95% reective)
Accessories: Order as separate catalog number.
SQ S
wivel-stem hanger (specify in 2" increments).
1B Ceiling spacer (adjusts from 1-1/2" to 2-1/2" from ceiling).
ORDERING INFORMATION
For shortest lead times, congure products using standard options (shown in bold.)
Example: LB 4 32 MVOLT GEB10IS
Catalog
Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE  For applications that require the clean appearance of a low-prole, brightness-
controlled wraparound. Provides broad distribution of light for oces, schools and corridors. Certain
airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility
table, for suitable uses.
Attributes: Curved prismatic diuser with linear side prisms minimize lamp image and provides high
angle brightness control. Luminous end plates soften appearance for improved aesthetics.
CONSTRUCTION  Metal parts are die formed from code-gauge steel. Prismatic diuser is 100%
acrylic with sonically welded luminous ends. Continuous side anges on xture body provide light trap
and continuous diuser support to prevent accidental opening and simplify maintenance.
Finish: Five stage iron-phosphate pretreatment assure superior paint adhesion and rust resistance.
Painted parts nished with high-gloss, high-reectivity baked white polyester enamel (low VOC).
ELECTRICAL SYSTEM  Thermally-protected, resetting, Class P, HPF, non-PCB, UL Listed, CSA Certied
ballast is standard. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout,
rated for required temperatures.
UL/CSA listed ballast disconnect w/strain relief and leads provided standard.
LISTING  UL Listed (standard). Optional: Canada CSA or C-UL. Mexico NOM.
WARRANTY  Guaranteed for one year against mechanical defects in manufacture.
Note: Specications subject to change without notice.
Low-Prole Wraparound
LB
T5 and T8
WIDE BODY
2', 4' or 8' length
2 or 4 lamps
Specications
T8 Length: 24 (61.0)
48 (122.0)
or 96 (243.9)
T5 Length: 46-1/2 (118.1)
22-1/2 (57.2)
Width: 15-3/8 (39.05)
Depth: 3 (7.62)
All dimensions are inches (centimeters) unless specied otherwise.
W
H
Notes
1 All T5 lamp types use GEB10PS ballast only.
2 T5HO only available in two-lamp conguration.
3 Must specify voltage.
4 Not available in 4 lamp.
F3