Specifications

SURFACE COMMERCIAL
WS
STANDARD WALL BRACKET
2', 3' or 4' Lengths
1 or 2 Lamps
FEATURES & SPECIFICATIONS
INTENDED USE
Ideal for stairwells, vanities and lavatories. Certain airborne contaminants
can diminish integrity of acrylic.
Click here for Acrylic Environmental
Compatibility table for suitable uses.
CONSTRUCTION
Parts are die-formed from code-gauge steel. Lens is 100% virgin acrylic, #12
pattern. Available in 2', 3' and 4' lengths. Trim, contemporary design. Welded
20-gauge steel construction. Convenience outlet and multilevel switching
available.
Five-stage iron-phosphate pretreatment ensures superior paint adhesion
and rust resistance. Standard finish is PAF high-gloss, baked white enamel.
ELECTRICAL
Thermally-protected, Class P, HPF, non-PCB, UL listed, CSA certified ballast is
standard. Sound rated A. Fixture conforms to UL 1570 and is suitable for
damp locations. AWM, TFN or THHN wire used throughout, rated for re-
quired temperatures.
Luminaire Efficacy Rating (LER) and Annual Energy Cost: Two-lamp LER.FW
= 54. Annual Energy Cost = $4.44. Based on 32W T8 lamp, 2850 lumens and
energy saving electronic ballast. Ballast factor = .88, input watts = 56.
Calculated in accordance with NEMA standard LE-5.
INSTALLATION
Designed for easy installation and maintenance.
LISTING
UL listed and labeled. Listed and labeled to comply with Canadian and Mexi-
can Standards (see Options).
WARRANTY
Guaranteed for one year against mechanical defects in manufacture.
Specifications subject to change without notice.
Sheet #: WS
Fluorescent
Options
CO Grounded convenience outlet, 120V
only (lower right)
2
S1 Pull-chain switch; installed bottom
left; on / off operation of all lamps
only (120V only)
2
S4 Pull-chain switch; four position —
front only, rear only, all on, all off;
installed bottom left (120V only)
2
GEB10IS Electronic ballasts, < 10% THD,
instant start
GEB10PS Electronic ballasts,
< 10% THD,
program start
EL Emergency battery pack (nominal
300 lumens); see Life Safety section
CSA Listed and labeled to comply with
Canadian Standards
NOM Listed and labeled to comply with
Mexican Standards
WS
Series
WS Standard
wall
bracket
Lamp type
17 17W T8 (24")
25 25W T8 (36")
32 32W T8 (48")
28T5 28W T5 (46")
Number
of lamps
1
2
Not included.
Diffuser type
A12 #12 pattern
acrylic
A12125 #12 pattern
acrylic, .125" thick
A19 #19 pattern
acrylic, .156" thick
Consult Lithonia Lighting sales
representative for other
shielding options.
Voltage
120
277
347
MVOLT
Others
available.
NOTES:
1 T5 lamps require GEB10PS ballasts.
2 For optional locations, consult factory.
Lead times will vary depending on options selected. Consult with your sales representative.
Example: WS 2 32 A12 120 GEB10IS
ORDERING INFORMATION
Catalog Number
Notes Type