Specifications

Options
Delayed action cylinder.
Hold-open, EDA, HEDA,
CUSH, HCUSH, SPRING CUSH or
SPRING HCUSH arm.
Full cover. (FC)
Designer Series metal cover. (DS1)
Special Templates
Customized installation templates or
products may be available to solve
unusual applications.
Contact LCN for assistance.
LCN 1460 SERIES
MOUNTING DETAILS
PARALLEL ARM (PUSH SIDE)
MOUNTING
Optional mounting requires PA SHOE,
1460-62PA for REGULAR or HOLD-
OPEN arms. Add prefix "P" to closer
description (e.g. P1461). P1461 closer
includes 1460-201 FIFTH HOLE
SPACER to support PA SHOE.
MAXIMUM OPENING
Regular or hold-open arm can be
templated for 100°
A = 4 1/4” (108 mm)
B = 9 1/4 (235 mm)
or 180°.
A = 1 3/4” (44 mm)
B = 6 3/4” (171 mm)
Hold-open points up to maximum
opening with hold-open arm.
1460 REGULAR or HOLD-OPEN MOUNT
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended at hold-open point, where a door
cannot swing 180°, or where CUSH-N-STOP arm is not used.
Clearance for 1460-62PA shoe is 4” (102 mm) from door face.
Top Rail less than 4 3/8” (111 mm) measured from the stop requires
PLATE, 1460-18PA. With Full cover, use PLATE, 1460-18PAFC. Plate
requires 1 3/4” (44 mm) minimum. Plate requires 1 1/4” (32 mm) minimum.
With Designer Series metal cover, use PLATE, 1460-18PADS1.
Head Frame flush or single rabetted requires PA FLUSH PANNEL ADAPTER,
1461-419.
Stop Width minimum 1” (25 mm).
Blade Stop clearance, requires 1/2” (13 mm) BLADE STOP SPACER,
1460-61.
Auxiliary Shoe, 1460-62A allows installation of regular arm with
overhead holder/stop. Special templating required.
Delayed Action Add suffix “DEL” to selected cylinder (eg. P1461 DEL).
Delays closing from maximum opening to approximately 75°.
Delay time adjustable up to approximately 1 minute.
14
1460 - 18PA
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/10