Specifications

FIAT
R
Chrome Plated Faucet
ID (each compartment): 21
1
/2” x 16
1
/2” x 12
3
/4” (546 x 419 x 324)
Overall height from floor is 35
1
/4
” (895)
ID (each compartment): 21
1
/2” x 16
1
/2” x 12
3
/4” (546 x 419 x 324)
A-1 DECK TYPE FAUCET
Quality built brass faucet with serving spout
mounts on rear deck.
Sheet Molding Compound (SMC)
Consists of four dry ingredients – filler, fire retardant, thickener, and internal mold release –
which are mixed together. The dry items are then mixed with liquid resin and a catalyst,
which form a thick paste. The paste is then spread evenly over a sheet of polyethylene and
sprinkled evenly with one-inch chopped glass fibers, which in turn is covered by another sheet
of polyethylene. The sheet is then kneaded with heavy steel rollers until all fiberglass is
covered with paste. The kneaded sheets are then layered and left to mature in bins for three
days. The polyethylene sheets are then removed and the SMC is no longer a paste but
something comparable to 1/4” wet leather. It is at this point that the sheet goes into a mold
under extreme heat and pressure and a desired mold is achieved.
32358_LaundryTubs 2/28/2003 10:42 AM Page 2
DISCONTINUED
DISCONTINUED