Specifications

Laundry Tubs
FIAT
R
255 Hutchings St. • Winnipeg, MB • R2X 2R4 • Ph. 800-665-7531 • 204-633-6122 • Fx. 204-632-4854
e-mail: [e-mail] • website: www.fiat.ca
A subsidiary of CR/PL, L.L.C. Company – Evanston, IL
SPECIFICATIONS
MODELS: L-1, FL-1, DL-1, LTD, FLTD
Fiat Products uses a specialized SMC process (Molded Stone
®
)
to manufacture all laundry tubs. Moldings are manufactured
in matched metal dies under heat and pressure resulting in
a homogeneous molded unit. Drain(s) with stopper(s) are
furnished as standard equipment. Capacity shall be 76 litres
(17 Imp gal) for the single tub sink and 152 litres (33 Imp gal)
for the double tub sink. Laundry sinks available in white
only.
Wall mounted tubs are provided with a heavy gauge
galvanized - steel bracket capable of withstanding 600
pounds. The side fillers and bottom tub support, which are
assembled in field to the mounting brackets, are made of
white molded plastic polymer.
Floor mounted tubs are provided with white baked enamel
angle legs that slip into molded sockets for rigid, friction-fit.
Easy leveling devices are provided for fast, even planing. This
handsome tub is capable of handling 600 pounds.
Model DL-1 tub has been designed for a countertop
installation. It comes with a self-rimming flange, four
locking corner bars and screws for fast tightening into
integral molded mounting legs and against the underside of
the countertop.
All single compartment laundry tubs are available in six-
packs (L-6 and FL-6) and bulk quantities.
All products must be installed in accordance with installation
instructions provided. Failure to do so may invalidate
warranty at manufacturer's discretion.
L-1 WALL HUNG SERV-A-SINK
FL-1 FLOOR MOUNTED SERV-A-SINK
DL-1 DROP-IN SERV-A-SINK
ID: 20
1
/4” x 17
1
/4” x 13” (514 x 438 x 330)
CSA Approved
ID: 20
1
/
4” x 17
1
/
4” x 13”
(514 x 438 x 330)
Overall height from floor
is 34
3
/4” (883)
CSA Approved
ID: 22
1
/8” x 17” x 12
3
/4”
(562 x 432 x 324)
Underside flange rim sealant
for watertightness supplied by
others.
32358_LaundryTubs 2/28/2003 10:42 AM Page 1