Specifications

Besa Lighting Co., Inc. • 6695 Taylor Rd. • Blacklick, OH 43004 • tel [phone] • fax [phone] • www.besalighting.com
Project Information:
All dimensions provided are nominal.
Allowance must be made for dimensional tolerance in handcrafted glasses.
sconces outdoor
location:
WET
235552
Marble
SPECIFICATIONS:
DESCRIPTION
Wall-mounted “quarter sphere” sconces featuring handcrafted glass
with enclosed top to conceal lamp if viewed from above.
LAMPING
Standard: 75W A19 120V incandescent, suitable for dimming.
CFL: 4-Pin CFL with non-dimming electronic ballast. 120V,
lamp not included.
LED: 7W LED Replaceable source 120V, non-dimmable, included.
DIFFUSER
Diffuser shall be handcrafted glass of various decors.
CONSTRUCTION
Half circle shaped, stamped aluminum fitter (9” L x 4.65” H x 0.75” D)
is powder coated white. Glass secured by stainless steel set screws.
MOUNTING
Installs directly to a 4” octagonal outlet box, centered on fixture.
75°C supply wire required for incandescent lamping.
LABELS
UL or ETL Listed. Suitable for Wet Locations (interior or exterior use).
quatro 10 shown in opal Matte (235507)
REV 1/14
6.5”
4.75” 10.5”
ORDERING:
Quatro 10
FIXTURE

LAMP OPTIONS
235507 Opal Matte (blank) 1x 75W A19 Incan
235552 Marble E1 1x 18W Quad 120V
LED 1x 7W LED 120V,
non-dimmable
Ex. 235552
1 Lt. Quatro 10 Sconce w/ Marble Glass,
White Finish
LED SCONCES:
• Total power of only 7 watts
• Non-dimmable
• Rated life: 30,000 hours
• 500 lumens
• CCT: 3000° Kelvin
• CRI: 80+