Installation and User Manual

9
8. Change screw hole covers and screw
on middle cover plate from left to right (as
shown in figure below).
9. Lie the refrigerator backwards, Remove
④ (right), Remove three self-tapping
screws from the lower hinge part(right).
Loosen the lower hinge axis then install it
on the reverse hole site, and tighten into
position(change it into left hinge part).
Remove the lower hinge part to the
left-bottom corner of the cabinet, Then fix
it with 3 screws, finally install part ④ on
the left-bottom and right-bottom of cabinet.
10. Stand the refrigerator upright and
carefully slot the lower door onto the lower
hinge pin and hold in position. install
middle hinge-left (in the plastic bag)
ensuring the lower door in secured in
place.
11. Carefully slot the upper door onto the
middle hinge pin and hold in position.
Move the upper door to an appropriate
position, adjust left upper hinge(in the
plastic bag) and upper door, then fit the
hinge pin into the hinge hole at the top and
the door to secure the door in place. Then
fix the upper hinge part with screws
(Please carefully hold upper door by hand
when installing).