User Operation Manual

This section describes products with filters
11
tubing to the shutoff valve using
the ferrule sleeve and
compression nut. Do not over
tighten.
5- Place other end of tubing in sink or
empty container. Turn water
supply back on and open the
shutoff valve to flush any
contaminants out. Run water until
clear. Close Shutoff valve.
Connecting the water supply to filter
inlet.
The items needed to complete the
connection can be found at your local
hardware store.
You can use plastic tubing, copper tubing,
or stainless steel tubing as the water line
installation kit.
PLASTIC
TUBING
COPPER
TUBING
STAINLESS
STEEL
TUBING
1/4" plastic
tubing
molded end
(bulb)
1/4" copper
tubing
1/4"
Stainless
tubing
1/4”
compression
nut (1)
1/4"
compression
nut (1)
1/4"
compression
nut (1)
Ferrule (2)
only