Design Guide

71bertazzoni.com
Refrigeration Handles
MULTIPLE INSTALLATIONS - REFRIGERATION HANDLES
2 1/8"
53
2 3/8"
59
PROFESSIONAL SERIES MASTER SERIES HERITAGE SERIES
1 1/2"
37
1 1/4"
31
2 3/8"
59
1 3/4"
45
HANDLE INSTALLATION ON CUSTOM PANELS
In case a custom panel is to be mounted on any of the models listed below with Bertazzoni handles,it will be necessary to
install M5 x 0.8 mm brass tapping inserts in order to secure the handle properly on the custom panel.
Recommended drill bit size to drill the pilot hole is 3/8".
Suitable inserts can be ordered at www.encompassparts.com Part Number: 95631A100, contains n°4 M5 brass hardwood
inserts and 1 M5 installation bit.
Do not use a power tool to mount the inserts. Installation of the inserts with imprope
rly calibrated power tools risk
damaging the panels.
1 5/8"
42
35 3/8"
900
BERTAZZONI HANDLES
DRILLING ON RIGHT SWING DOOR
20 1/4"
514
35 3/8"
900
1 5/8"
42
20 1/4"
514
BERTAZZONI HANDLES
DRILLING ON LEFT SWING DOOR
PROHKCOL MASHKCOL HERHKCOL
HANDLE INSTALLATION ON CUSTOM PANELS
In case a custom panel is to be mounted on any of the models
listed below with Bertazzoni handles,it will be necessary to
install M5 x 0.8 mm brass tapping inserts in order to secure
the handle properly on the custom panel.
Recommended drill bit size to drill the pilot hole is 3/8”.
Suitable inserts can be ordered at www.encompassparts.com
Part Number: 95631A100, contains n°4 M5 brass hardwood
inserts and 1 M5 installation bit.
Do not use a power tool to mount the inserts. Installation
of the inserts with improperly calibrated power tools risk
damaging the panels.
Dimensions in parentheses are millimeters unless otherwise specified.