Installation Sheet

15
4) Loosestrainreliefbyunscrewingthetwo
strainrelief'sscrewsasindiagram.







5) Remove damaged supply cord set by taking
off the 4 electrical connection screws (block
L1,N,L2andGroundscrew,seediagram)
6) Insert the new supply cord set in the strain
relief and lock it with two strain relief's
screwsinsuitableposition.
7) Fixwell thering
terminalsG, L1,N, L2of the
new supply cord set asshown in diagram
withits4screws
8) Re‐install the back enclosure panel with 6
screws
9) Slide the a ppliance  back into its proper
location
10) Re‐connect the appliance to the electri cal 
power.

ELECTRICALGROUNDING
Thisapplianceisequippedwithafour‐prongplug
for your protection aga inst shock hazard and
should be plugged directly into a properly 
grounded receptacle. Do not cut or remove the
groundingprongfromthisplug.
