Installation Sheet

11
INSTALLINGTHEBACKGUARD
The back guard must be installed prior to
operation of the appli ance for appropriate 
ventilationoftheovencompartment.
Thesuppliedbackguardisa2‐partassembly.The
box also contains a set of metal screws for
securingthebackguardtotheworktop.



Disassemble the back guard and position the
frontpart  on theworktop. Align the screw holes
with the corresponding holes at the back of the
worktop.


If the holes are not aligned, partially loosen the
brackets at the back of the worktop as  shown
below.



Installthefrontpartofthebackguardby
tighteningthe2centralscrewsfromthetopand
2lateralscrewsfromthebottom.
