User Manual

6
BEFOREINSTALLATION
This appliance shall only be installed by an
authorizedprofessional.
This appliance shall be installed in accordance
withthemanufacturer’sinstallationinstructions.
This appliance must be installed in accordanc e
withthenorms&standardsofthecountrywhere
it will be installed. The installation of this
appliance must conform to local
codes and
ordinances. In the absence of local codes,
InstallationsmustconformstoAmericanNational
Standards.
The appliance, when installed, must be
electrically grounded in accordance with local
codes or, in the absence oflocal codes, with the
NationalElectricalCode,ANSI/NFPA70.
All opening andholes in the wall
and floor, back
and under the appliance shall be sealed before
installationoftheappliance.
WARNING!
Donotuseaerosolspraysinthevicinityofthis
appliancewhileitisinoperation
ROOM VENTILATION: An exhaust fan may be
used with the appliance; in each case it shall be
installed
in conformity with the appropriate
national and local standards. Exhaust hood
operationmayaffectotherventedappliances; in
each case it shall be installed in conformity with
theappropriatenationalandlocalstandards.
INSTALLINGTHELEGS
Bertazzonirangesmustbeusedonlywiththe
legsproperlyinstalled.
Fourheightadjustablelegsareshippedwiththe
rangeinthepolystyrenecontainersituatedover
theappliance.
Before installing the legs, position the appliance
nearits final locationasthe legs are notsuitable
formovingtheapplianceoverlong
distances.
After unpacking the range, raise it enough to
insert the legs in the a ppropriate receptacles
situated on the lower part of the appliance.
Lowerthe range gentlyto keep anyundue strain
fromlegsandmountinghardware.Ifpossibleuse
apalletorliftjackinsteadoftiltingthe
unit.
Adjust leg height tothe desired level bytwisting
the inside portion of the leg assembly until the
properheightis reached.Check with a levelthat
thecooktopisperfectlylevel.