Use and Care Manual

17
OVEN TEMPERATURE INDICATOR
The range is equipped with a device to indicate
the temperature in the middle of the oven. This let
you check the temperature inside the oven and
adjust food cooking temperatures more accura-
tely.
When the oven is turned on, the heating elemen-
ts will start working at maximum and the ther-
mometer dial will start to move towards the set
temperature. Heat is optimally distributed inside
the oven when the thermometer dial has stopped
and pre-heating is fi nisched. When the oven is tur-
ned off , the temperature on the thermometer will
slowly drop until it reaches room temperature
.
• the gauge is for reference only.
The Gauge is equipped with a digital interface
that show the settled functions and manage the
cooking time.
Set de gauge:
1. Press MODE.
2. Use the “<” and “>” buttons to select SET-UP
3. Press MODE.
4. Press the “<” and “>” buttons to select desired
funtions: language, 12h/24h, time, volume,
showroom.
•Language press “<” and “>” buttons to select de-
sired language and press MODE to confi rm
•12h/24h press “<” and “>” buttons to select desi-
red clock indication and press MODE to confi rm
•Time press “<” and “>” buttons to select desired
time (keep on press the button to fast forwording)
and press MODE to confi rm
•volume press “<” and “>” buttons to select desi-
red volume and press MODE to confi rm
• showroom don not use this fnction, is only for
retailer
End delay mode:
1. Press MODE.
2. Use the “<” and “>” buttons to select DELAY/
END
3. Press MODE.
4. Press the “<” and “>” buttons to select the desi-
red cooking time and press MODE
5. afhter 3 seconds will appeare the end of co-
oking time, press M to start cooking, press <
or > buttons to set a diff erent end of cooking
time (in this function the set time is the end of
cooking) than press MODE to confi m.
6. set function ant temperature with the konbs.
7. If the delay start is settled the display will show
the cooking start time otherwise the oven swi-
tch on
8. Once the set end of cooking time is fi nished, a
sound will be heard and the oven automatically
switches off .
Note: to change settled timerestart from point 1.
Timer:
1. Press MODE.
2. Use the “<” and “>” buttons to select TIMER
3. Press MODE.
4. Press the “<” and “>” buttons to select the desi
red time and press MODE
5. The countdown start immediately and the di-
splay will show the remaining time
8. Once the set time is fi nished, a sound will be
heard
Note: to change settled timerestart from point 1.
This function is only a minute minder and do not
stop the cooking
Meat probe
The meat probe allows you more control over
how your foods are cooked by automatical-
ly disabling the specifi ed cooking mode when a
dish's desired temperature, defi ned by the cook,
has been reached. The probe expresses the cur-
rent temperature of the meat as it cooks.
Programming the meat probe
1. Insert the food probe in the item to be cooked.
For best results, insert the probe as close as
possible to the center of the item and make
sure it is not in contact with bones or fat. Impro-
per placement of the probe could shut the oven
off too early and result in uncooked food. With
poultry, make sure the probe does not rest in a
cavity.
6 set function ant temperature with the konbs.
2. Press MODE.
3. Use the “<” and “>” buttons to select MEAT
PROBE
150
200
250
300
250
400
450
500
CLEAN
°F
MODE
/ Electric oven