Install Guide

40
TROUBLESHOOTINGGUIDE
OVENPROBLEM POSSIBLECAUSESAND/ORREMEDY
Rangedoesnotfunction Rangeis notconnectedto electricalpower.Aska professionaltocheck
powercircuitbreaker,wiringandfuses.
Selfcleancycledoesnotactivate Doorisnotshuttightenoughforautomaticdoorlatchtolock
Broildoesnotwork Temperature controlknob is rotatedtoo farpastbroilposition (500°F);
PREHEATINGindicatorwilllightintermittently
Doordoesnotopen Oven is still in selfclean mode. Door latch will release when safe
temperatureisreached.
Ovenlightdoesnotwork Lightbulbisburnedout.Rangeisnotconnectedtopower/cleaniscycle
on
Ignitersdoesnotwork Circuitistrip ped.Fuseisblown.Rangeisnotconnectedtopower.
Igniters sparking but no flame
ignition
Gassupplyvalveisin“OFF”position.Gassupplyisinterrupted.
Igniters spark continuously after
flameignition
Ignition microswitches remain incorrectly engaged; call a qualified
technicianforrepair.
Burnerignites but flameislarge,
distorted,oryellow
Burnerportsareclogged.Unitisnotsettotheappropriategastype.Call
aqualifiedtechnicianforgasconversionprocedure.
Oven dooris locked and will not
release,evenaftercooling
Turntheovenoffatthecircuitbreakerandwait5minutes.Turnbreaker
backon.Theovenshouldresetitselfandwillbeoperable.
Ovenisnotheating
Checkthecircuitbreakerorfuseboxtoyourhouse.Makesurethereis
proper electrical power to the oven. Make sure the oven temperature
hasbeenselected.
Oven light is not working
properly
Replaceorreinsertthelightbulbiflooseordefective.
Ovenlightstayson Checkforobstructioninovendoor.Checktoseeifhingeisbent.
Cannot remove lens cover on
light
Theremaybesoilbuilduparoundthelenscover.Wipelenscoverarea
withacleandrytowelprior toattemptingtoremovethelenscover.
PREHEATING indicator lights up
intermittently and sound alarm
on
This is a FAULT alarm indicating the failure of the cooling fan/s. Try
resettingbyturningbothselectorstotheOFFposition.Iftheerrorisnot
repaired, call a qualified technician for diagnosis and repair. If not
repaired, this error
indicator will appear again within 10 seconds once
theovenisactivatedinanyfunctionsforwhichcoolingfansarerequired
to operate, preventing the use of the oven. Set both selectors to OFF
positionandcallaqualifiedtechnicianforrepair.
HEATING indicator light turned
onintermittentlyandwithsound
alarmon
ThisisaFAULTindicatingfailureoftheovensensortemperatureprobe;
in this case cooling fans will start automatically. To reset, switch both
selector to the OFF position.To stop buzzer and light indicator,
disconnect the appliance from the
main electrical supply and call a
qualifiedtechnicianforrepair.
CLEAN indicator light on
intermittently and sound alarm
on
Electrical power failure happening during cleaning cycle operation;
cleaning cycle interrupted; cooling fans remains both activated; the
error will be reset by putting two selectors in OFF position; repeat
cleaningcycleifneededafter34hours.
CLEAN indicator light turned on
intermittently,soundalarmoff
Interruption/Stopofanincompletecleaningcycleduetoaintentionalor
accidental displacement of one of the two oven selectors from CLEAN
position during cleaning cycle operation; put both selectors in OFF