Instruction manual

Side profiles door
The door-type "side profiles" is disassembled to allow cleaning of the glass.
To do it, remove the top of the door operating on 2 ends hooked to the side profiles.
Remove the glass (1 or 2 depending on the version) from their seats,
making sure to their positioning to insert them properly after cleaning.
To reassemble the door, run contrary to the previous phases.
If on the glass is present a written, it must be readable
watching the glass from the inner part of the door.
If there is no written but there is a frame drawn on the glass
(such as black or gray frame), the same frame has to be turned
towards the inside of the door, in order to leave the glass glossy
completely visible from the outside of the door.
OVEN DOOR DISASSEMBLY
34