Troubleshooting guide

17
the following paragraphs about how to disable the sound alarm and restarting the
oven.
END OF COOKING once having selected a cooking function and set the desired temperature, touch the
M key to access the programming mode for at least 2 sec. the ) symbol switches on.
Release and touch again the M key.
On the display the AUTO symbol starts blinking and the writing "dur" appears. Touch
again the M key. On the display the writing "End" appears. The last one changes few
seconds after with the symbol 0· 00.
Set the end of cooking time with the keys - or
+. (maximum available time:
10hOOm).
The selected time is automatically processed by the programmer in a few seconds,
or you can also touch the M key many times just to see again the current time.
The cooking immediately starts, while on the programmer display the current time is
shown again in a few seconds. The AUTO and POT symbols will be on the display.
Once the set end of cooking time is finished, a sound will be heard and the oven
automatically switches off. Please see the following paragraphs about how to disable
the sound alarm and restarting the oven.
AUTOMATIC CCOKING
Set a cooking time following the instructions on the cooking time paragraph, then set
the end of cooking time following the instructions on the previous paragraph. (Max
available end of cooking time 24h). The oven automatically switches on at a
determined time which is the difference between the end of cooking time and the
cooking time.
During the waiting time before cooking, which goes from the oven start to the
heating, on the display appears the A symbol to show that an automatic program is
on and the current time. The oven on is marked by the POT symbol. Once the set
end of cooking time is
finished, a sound will be heard and the oven automatically
switches off.
Please see the following paragraphs about how to disable the alarm and restarting
the oven.
How to disable the sound alarm: To disable the sound just touch one of the keys.
Operating again the oven
Once a semi-automatic or automatic cooking has expired, on the display appear the
current time and the blinking AUTO symbol. In this condition, the heating elements
and the light bulb of the oven are disabled. To enable again the oven, just touch and
keep the M key up to see the symbol POT on the display and the AUTO symbol
disappears.
OTHER FUNCTIONS How to delete a cooking time (semi-automatic or Automatic)
To delete a semi-automatic or automatic cooking program, with the A symbol on,
touch together the - and
+ keys for at least 2 seconds or anyway up to see the POT
and the disabling of AUTO symbol.
How to delete the countdown timer
To delete the counting of the timer, which symbol is ) t touch the M key for at least 2
seconds or anyway up to see the ) symbol blinking. Touch together the - and
+ keys.
Checking the function settings
The set or remaining time of every cooking function of the programmer can be
recalled to the display by entering in program mode with the M key. Touch and keep
the M key for almost 2 seconds or anyway up to see the BELL symbol. The
remaining time appears on the display, or a series of zero numbers if the timer is
disabled. Touch again the M key. On the display appears the "dur" writing, then
alternately the remaining time or a series of zero number (disable timer).
By touching again the M key, the end of cooking time appears together with the
"End" writing.
How to change the current time or the sound level
With the programmer in standard mode, the (2) symbol is on, touch together the -
and
+ keys for at least 2 seconds or anyway up to see the dot (3) blinking.
To update the hour on the display: touch the + or - keys.
To change the sound level: touch the M key. On the display appears the writing:
Ton.. followed by a number. Select with the - key your favourite sound level.
Note: number 1 is referred to the highest sound level. The available levels are 3.
Attention: Power cut causes the loss of any program, even the clock; that means
the programmer will have to be set again
.